A Virgin wifi booster is a gadget that boosts the signal strength of your home Virgin Media wifi router. The primary advantage of utilizing a booster is that it has the potential to assist in enhancing the speeds of your virgin internet connection as well as extending the range of your VIRGIN WIFI BOOSTER signal.
HOW TO SET UP A Virgin Wifi Booster
Ensure that each Booster is plugged directly into a mains outlet, not through an extender cord, a power strip, or a surge protector.
Steps-:
- The smaller Booster should be plugged into a nearby mains outlet. Turn the mains socket on. The arrows will start to flash amber or red, and the white power light will turn on.
- Using the included Ethernet cable, join the Booster to your Hub.
- Connect the bigger Booster to a power outlet in the same room and turn it on. The connection lights will flash amber for up to 2 minutes before turning off, while the white power light will remain lit.
- Please allow an additional 10 minutes for software updates. Without these updates, your Boosters may not function properly.
- We’ll make your Booster’s WIFI network name and password the same as your Hub’s to make connecting and moving about your home easier.
- Hold down the WPS button on the bigger Booster for around 10 seconds before releasing it. The Wireless and Power lights will begin to flash.
- Hold the WPS/Virgin Media button on your Hub until the lights begin to flash. The WIFI Booster will begin copying the information from your Hub.
- The copying process is complete when the Wireless LED on the WIFI Booster stops blinking and turns off. The power light will remain illuminated.
- You can now unplug the bigger Booster and relocate it to a more convenient location in your home. The light cycle will be repeated when you turn the Booster back on in the desired spot.
HOW TO LOGIN TO VIRGIN WIFI BOOSTER
- Once you have pressed and held the WPS button on the bigger Booster for approximately ten seconds, you can let go of it.
- The lights for the wireless connection and the power supply will begin to blink.
- While holding the WPS/Virgin Media button on the Hub, wait for the indicator lights to begin flashing.
- After then, the Boosters will begin to duplicate the details of the Hub.
HOW TO UPDATE FIRMWARE Virgin Wifi Booster
- After you have connected one end of the power supply to your new Hub, plug the other end of the power supply into the main socket.
- Turn on the main power plug in your home.
- By pressing the power button on the hub’s rear, you may turn on your brand-new Hub.
- Your brand-new Hub will, at this moment, attempt to establish a new connection to Virgin Media’s network.
FEATURES OF THE Virgin Wifi Booster
There are parts of your house where you cannot receive a WIFI signal.
- These are refer to as dead zones or dead patches in the industry. It refers to locations inside your home when the WIFI connection is completely lost. In other instances, the signal may not be able to reach you because you are too far away from the WIFI router, or because there is a physical barrier in your home that prevents the signal from passing through.
- A WIFI network extender or Virgin Wifi Booster can assist fill in the coverage and eradicate those dead spots in your home if there are areas where you cannot receive any WIFI signal.
There are some spots in your home where the WIFI connection is very slow.
- You spend most of your time on the first floor, where the WIFI connection is effective but sluggish.
- Many homeowners simply learn to accept these circumstances and find ways to work around problematic places.
- You might already know that you can’t watch a video streaming into the dining room, nor can you use FaceTime in the living room. Perhaps your children know that to play video games, they need to go to the top floor.
- Think about getting a VIRGIN WIFI BOOSTER so you won’t have to use sluggish virgin internet connections in specific parts of the house. It will be an instant performance improvement (that will also be cost-effective), enabling you to rethink how you use different portions of your home.
VIRGIN WIFI BOOSTER REVIEW
The Virgin Intelligent WIFI Pod is a simpler, more integrated option that builds a wireless mesh network with your existing router. For me, stability in weaker areas has improved, coverage has improved, and fewer connection issues.
Read more about:
signaltech wifi booster
pix-link-2.4g login
setup.pix-link.net
galaway ac1200 setup
how to set up a blink outdoor camera
Joowin WIFI extender