How to Setup Netfun WiFi Extender?

Setting up a Netfun wifi extender is like setting up any other extender. It works similarly to other devices, but the steps might be a bit different at times. It’s important to follow the initial setup for your new extender, and also know the details of your current network.

To setup the Netfun WiFi extender, you need to connect your device manually to your router’s network. This means you’ll need the login information for your router’s WiFi network. Once connected, you can adjust the WiFi settings and other advanced options. After these steps, your device will be ready to use.

Everything you need to know about setting up the Netfun extender, from what’s needed to the actual setup process and common questions, can be found on this page. Let’s begin by understanding the basic requirements for setting up the Netfun WiFi extender.

Things Needed to Set Up Netfun WiFi Extender

The things you need to get ready for setting up the Netfun extender are mostly about setting up the hardware and remembering a few important points. Here’s a list to help you understand the basic things you’ll need:

1. Take the extender out of its box and put it close to your router.
2. Plug the extender into a nearby wall outlet next to your WiFi router.
3. Know the login information (like username and password) for your router’s WiFi network.
4. Your router should have a WPS button if you plan to use the WPS setup method.
5. Make sure there’s a stable power source available.
6. You might need an Ethernet cable, but it’s not necessary.

After you’ve completed these steps and understood the instructions, you’re ready to proceed with setting up and installing your Netfun WiFi extender.

Netfun Wifi Extender Setup

Method 1: Netfun extender setup using the WPS

1. Turn on both the router and the extender and ensure they are close to each other.
2. Find the WPS buttons on both the Netfun extender and the router.
3. Press the WPS button on the extender once.
4. Then, press the WPS button on the router once.
5. Wait for a few seconds and make sure you press both buttons within 2 minutes.
6. You’ll notice the lights on both the router and the extender blinking for a short time.
7. Finally, the Netfun WiFi extender setup using WPS will be successfully completed.

Method 2: Setup Using Web Browser

• Turn on both the extender and your computer.
• Connect the extender to your PC using either a cable or WiFi.
• Open a web browser to start setting up the Netfun extender.
• Type “192.168.10.1” in the address bar and press Enter. This takes you to the extender’s login page.
• Use “admin” as the username and leave the password field blank, then click Login.
• You’ll enter the extender’s settings. Choose Setup or Quick Setup.
• Follow the instructions shown on the screen in the Netfun WiFi extender setup wizard.
• Connect the extender to your router using your router’s WiFi details.
• Adjust the WiFi and other settings for the Netfun extender as needed.
• Click Save when finished. The extender will restart.
• Reconnect your device to the extender’s network to use the internet.

Netfun Extender Not Working After Setup?

Are you facing issues with your Netfun extender not functioning properly even after the setup? Don’t worry! There might be a few reasons why this problem is occurring. It’s possible that your device isn’t configured correctly, or there could be a pending firmware update for your extender. We’ve listed some steps below to help you troubleshoot and resolve this issue.

How to Fix Netfun Wifi Extender Issues?

Are you facing issues with your Netfun WiFi extender even after completing the setup? Follow these steps to fix the problem:

1. Ensure that the setup was done correctly.
2. Log in to the Netfun extender to double-check the settings.
3. If everything seems right, check for any available firmware updates.
4. Follow the on-screen instructions to update your Netfun extender’s firmware to the latest version.
5. After updating, check if the setup issues persist.
6. If the issues continue, try rebooting your device and attempt setup again.
7. If problems persist, perform a reset on your Netfun extender.
8. Press and hold the reset button on the extender for about 10 seconds.
9. When you release the button, the extender will reset.
10. Then, reconfigure the extender following the previous setup instructions.
11. This should resolve the issues you were facing.”

FAQs