Do you have WiFi connectivity problems? Try a new 192.168.10.1 wifi repeater that extends your signals to your garage, pool, and other areas. Now that you may use your laptop or cell phone outside of your room without fear of losing connection. Because of its compact size, it can fit in any wall socket and take up the least amount of room. A fast setup manual, one Ethernet wire, and the actual Wireless N repeater is included with the item. Let’s start the 192.168.10.1 wifi repeater setup using 192.168.10.1 and WPS method.
Click Here To Start Setup Process
Click Here To login
Contact our experienced technical support team If you are having any kind of issues
192.168.10.1 wifi repeater setup via WPS
- Make sure the extender and router are in the same room or within a 5 to 10-foot radius for this http 192.168 10.1 wifi repeater setup.
- Connect the extender cord to a wall outlet and wait until the power light becomes steady.
- Your router’s WPS button should be pressed. It may be in the front or the rear, depending on the model.
- Push the WPS button on the extender as well within two minutes, and WPS on both devices will start blinking.
- The wireless n repeater may often be configured using WPS in only 15 to 20 seconds.
- When WPS is successful, the extender’s WPS LED turns solid, and a new network name appears in your wifi list.
- It will choose the same network name as your router, which ends in _EXT. The password for the ext is likewise the same as for your router.
- To obtain the Wireless N wifi repeater handbook, click here.
192.168.10.1 wifi repeater setup via web browser
- The power light will turn green as soon as you put the extender into an outlet, and the wifi light will begin to flicker.
- The repeater must now be connected to your computer or mobile device via ethernet cable or wifi in order to proceed.
- You must locate the “Wireless N” network name and connect to it in the wifi list on your laptop or mobile device.
- By connecting an Ethernet cable from an extender to your PC or laptop, you may create an Ethernet connection.
- So, after the Extender is linked to your computer, laptop, or mobile device, you may proceed with a web-based setup.
- On each of your devices, launch any browser, then put 192.168.10.1 into the address box.
- The default username and password for the wireless N Wifi repeater are “admin,” and it will open the login page for you.
- Tap “Submit” Choose the repeater mode or AP mode with the following screen’s wizard option.
- Select your router’s wifi name from the list of accessible networks when it has finished scanning.
- To finish setting up your wireless N WiFi repeater, provide the appropriate password.
- When you click Apply, the settings take around 60 seconds to take effect. Later, when the _EXT network appears in your wifi list, connect your devices to it.
How to reset wireless n repeater?
The steps to reset the wireless N repeater, which are listed below, are as follows.
- Find the repeater reset button on your repeater if you want to reset it.
- Use a paper-clip to locate it.
- Under the wireless repeater reset button, insert the pin.
- Hold it for the next two to five seconds.
- Release it a little bit later.
- Make sure it is properly reset,
- Restart it when the reset is complete, and then look at the signal light.
Factory Reset 192.168.10.1 Wifi Repeater, IP Address
Every network device that can be managed using a 192 |.168.10.1 admin login, IP address and a web browser come with a reset button that, in the event that something went wrong and you lost access, will reset the device to its factory default settings.
Steps to reset 192.168 10.1
- Look for a little reset button next to the Ethernet ports or on the back of the device.
- Utilizing the needle, press the reset button and hold it for 10 to 15 seconds.
- After the router reboots and the LED starts flashing again, release the reset button.
Restoring router settings to factory mode may take a few minutes.
Try the 192.168 10.1 login, IP address once more to access the settings page.
It is straightforward and quick to access the router using the default login, ip 192.168 10.1 address and URL, but if you reset the router and encounter any problems accessing the IP address, be sure to have a backup configuration file to restore after the factory reset of the device. Before you reset your router, check additional popular login IPs used by other companies if 192.168.10.1, 192.168.0.1, 192.168.2.1, 192.168 1.10, 192 168.10 1, 192.168 29.1, 192 168 10 1 and 10.0.0.1 are not working for you.
192.168.10.1 Admin Setup for WiFi Repeater.
You may finish your device’s WiFi Repeater 192.168.10.1 Admin Setup by using the instructions below. Observe the given guidelines to successfully complete the process:
- Set up your router in a suitable area. Any interference 192.168 1.10 must not degrade the signal strength of your router.
- Connect the electrical socket to the wireless repeater.
- Connect your device to a wifi repeater.
- Open the LAN properties on your PC after the repeater has connected.
- Go to the Start menu on your device, then select Control panel. Select Manage Network Connection from the list of options under Network Status and Task.
- Click on “LAN” using the right mouse button, then choose Properties. Obey the directions displayed on the screen.
- Enter 192.168.10.1 in the address box at this time.
- Enter the IP address in the URL field by going to the web browser and clicking there. Press the Enter key.
- Enter your login information and click the login button on the next page. You’ll access the setup wizard after clicking this.
- Click on the “Repeater – Onekey setup” option under “WiFi Repeater Mode.”
- Select “Wireless network selection” and then “Refresh list” from the menu that appears.
- To connect the repeater and router, choose the main router’s wifi network. Next, tap.
- When asked, enter the WiFi login information.
- Click the “restart” and “Apply” buttons. Select “Ok.”
- The 192.168.10.1 admin configuration for your wifi repeater is finished.
Therefore, use the aforementioned procedures to complete the wifi repeater 192.168 10.1 admin setup and resolve your wifi connectivity troubles if you want to expand the wifi signals for improved wifi range in locations with dead zones.