The loom WiFi extender is one of the most efficient tools for enhancing a WiFi connection that are now available to buy on the market. You can get one of these devices here. The functionality of the device includes a potent range extender, which extends the distance over which users are able to receive signals.
Click To Start Setup Process
Click Here to Login
Loom Wifi Extender Setup Using Browser
The instructions for the loom wifi extender setup are first given in the lines below.
- Enter the IP address for the loom WiFi extender signal booster or https://www.prowifiboost.com in the browser’s address box.
- Investigate it, register your new range extender, and make an account.
- The Email section of your desktop screen is where you should enter your cell phone number or email address.
- Create a loom range extender admin account.
- Your loom wifi extender password must be entered in the text area along with a second confirmation.
- After that, select the name of your device’s wireless network from the shown lists, and then continue.
- Enter your current router password after selecting your WiFi range extender SSID.
- The proper login procedure is now being use.
Loom Wifi Booster Setup using a WPS button
The following are the procedures that you need to do in order to connect your device to the internet using the WPS technique. The following are the procedures that you need to do in order to connect your device to the internet using the WPS technique.
- Find the WPS button on your loom range extender and router, gateway before connecting your system using the WPS technique.
- You must utilize WPS from the settings page of your current router if it lacks a WPS button.
- You now need to push the actual WPS button on your router and extender.
- Open the router settings setup wizard page and utilize the software button if it has a WPS button.
- Once your loom WiFi booster and router have connected, proceed as before.
- Check the router connection light and the booster signal light.
- The light on your WiFi range extender should be eliminated or flashing.
- The range extender devices will connect to your router’s 2.4GHz and 5GHz band network if the WPS buttons on both your router and extender are simultaneously pushed.
- The range extender has now successfully connected to your router’s network.
Loom wifi extender n300 Login Instruction
Start by correctly logging into your device in the web browser using the instructions listed below.
- Click the settings button. You should join the extender network using your smartphone.
- Then, to log in, open the browser on your computer, laptop, tablet, or smartphone.
- In the search field, type in the IP address of your extender. Alternatively, you may scan the QR code to access the login page.
- The web page is then opened after that. Next, type the security key and admin name.
- Tap the login button.
- Then adhere to the instructions displayed on the mobile device.
- Change the password in the settings to ensure high security.
- Next, select “Save.”
- Loom wifi extender login process is finished now.
How to reset loom WiFi extender?
The instructions for resetting the loom WiFi extender are as follows.
- Start by turning on the loom WiFi extender’s power.
- Then, look for a reset button on your loom range extender and hit it.
- Keep holding the loom wifi extender reset button after that. If you run into any difficulties with your arthritic hands, use a needle or a pin.
- Once the LEDs briefly come on, keep pushing or holding the loom reset button.
- Release the loom reset button after the loom extender LEDs have stopped flashing.
- The wifi extender has now been successfully reset.
- Finally, you must set up and utilize your loom extender settings.
HOW TO UPDATE THE FIRMWARE EXTENDER?
- In order to store the expansion program, flash memory is utilized (routing software). To check if new firmware is accessible and to upgrade your device, go to www.coredytech.com.
- Step one should start with a web browser open.
- In the browser address bar, type https://www.loom.com/.
- Use the username “admin” and password “admin” to log in. This is the default start page.
- From the drop-down option on the right, choose Upgrade Firmware. “Upgrade” may be selected by right-clicking.
- Reset the loom wifi extender to its factory defaults when it has rebooted.
FAQs
Although WiFi extenders have the potential to expand your wireless network’s coverage, their performance is constrained by various factors. These include the speed of your incoming internet connection, the distance from your router, the specific areas in your home requiring WiFi coverage, and the overall WiFi usage patterns within your household.
It’s acceptable to connect two or more Wi-Fi extenders to a single router directly. However, it’s not advisable to link one extender to another through a wireless connection. Additionally, utilizing multiple Wi-Fi extenders without allocating different channels for each can result in interference among them.
1. To reset this device to its factory settings, follow these steps:
2. Unplug the device and wait for 90 seconds (this is a necessary step).
3. After the wait period, plug the device back in.
4. Locate the reset hole on the device and use a slim stick or similar tool to press and hold the reset button for 10 seconds.
5. Keep holding the reset button until all the blue lights on the device turn off.
This process should reset the device to its factory settings.