DLink Camera Setup, Login and Reset Guide

Confused about how to set up, login, and reset your DLink camera? Our complete guide has everything you need. Find out how to set up your camera quickly, log in securely to see live feeds and recordings, and reset it when you need to. Our helpful guide can help you get the most out of your DLink camera today.

Login Dlink Camera

Follow these steps to log in to your D-Link camera:

1. Open your web browser, which could be Chrome, Firefox, Opera, or another.
2. Type 192.168.0.20 into the address bar of your web browser to get to the router’s web-based user interface. This is the usual IP address for getting to the admin interface.
3. You should see two text fields where you can type in a username and a password.
4. Your D-Link DCS-5025L camera’s default username is admin.
5. The blank password is used by default.
6. Enter the username and password, then hit “Enter.” You should now see the router’s control screen.

Please keep in mind that the exact steps you need to take may be a little different based on the model and firmware version of your D-Link camera. It’s always best to check the camera’s manual or online documentation for accurate, device-specific directions.

Dlink camera setup using mydlinkLite App

Follow these steps to set up your D-Link camera with the help of the mydlink Lite app:

1. Download the mydlinkLite app. On your mobile device, go to the App Store (for iOS) or the Google Play Store (for Android) and look for “mydlink Lite.” Get the app and run it.
2. Open the mydlinkLite app and tap “New users, sign up here.”
3. To make a mydlink account, just follow the on-screen steps. Make sure to give a real email address and password.
4. Sign in to your mydlink account. Once you’ve made an account, open the mydlink Lite app and sign in using the passwords for your mydlink account.
5. Connect your D-Link camera: Tap the “+” icon or “Add a device” button in the app.
6. Choose the “Scan QR Code” or “Scan Barcode” choice. Use the camera on your device to read the QR code on the camera or its box. The camera will be found by the app, and it will be added to your mydlink account.
7. Connect the camera to your Wi-Fi network. To connect your DLink camera to your Wi-Fi network, follow the on-screen directions.
8. Make sure that the camera is close enough to your Wi-Fi connection for it to work.
9. Change the settings of the camera (optional): Once the camera is connected, you can use the mydlink Lite app to change options like motion detection, recording schedules, and notifications. Check out the app’s interface and choices to set up the settings you want.

Please keep in mind that the exact steps may be a little different based on the version of the mydlink Lite app you are using and the model of your D-Link camera. Always look at the app’s directions or the camera’s manual for specific, device-specific instructions.

How to reset Dlink camera?

Most of the time, you can follow these steps to reset your D-Link camera to its original settings:

• Find the restart button. On your D-Link camera, look for the button that says “Reset.”
• Depending on the type of camera, the reset button may be in a different place.
• Get a paper clip or something thin that can fit into the reset hole.
• Make sure the camera is turned off by removing the batteries or the power charger.
• Put the paper clip or thin item in the reset hole and press and hold the reset button.
• To turn on the camera, keep holding down the reset button and either plug in the power charger or put in the batteries. Keep holding down the reset button for about 10 to 15 seconds.
• Let go of the reset button after you’ve held it for the right amount of time.
• Give the camera a few moments to finish resetting. During this time, the camera will restart and go back to the settings it had when it was first made.

Please keep in mind that the way to reset your D-Link camera may be a little different based on which model you have. Always check the camera’s manual or the D-Link website for specific, detailed directions on how to set up your device.

Dlinkrouter.local

Why is my D Link camera not working?

There could be several reasons why your D-Link camera is not working. Here are some common troubleshooting steps to help you identify and resolve the issue:

Power and connection:

• Connect the camera to a power supply. Power adapter and batteries should work.
• Check the camera’s power LED.
• Plug the Ethernet cable into the camera and router or switch if the camera is attached.
• If using Wi-Fi, make sure the camera is in range and the network is working.

Network connectivity:

• Check network connectivity by connecting other devices to the internet.
• If the camera has an Ethernet connection, secure the cord and try a new cable if possible.
• Check the camera’s Wi-Fi network. Restart your router and camera to reconnect.
• Check the camera Wi-Fi password.

IP address conflicts:

Avoid network IP address conflicts. Dual-IP devices can disrupt connectivity. Make sure the camera’s IP address is unique.

Firmware and software:

• Update your camera firmware. Search the D-Link website for your camera model to obtain firmware upgrades.
• Update your camera app or program.
• Check D-Link or the app store for updates.

Reset the camera:

If all the above measures fail, restore the camera to its factory default settings (as indicated in a previous response). This can fix configuration difficulties.

FAQs