Setup the Cudy Re300 WiFi extender

How do I Setup Cudy WiFi extender Re300?

by
How do I set up the Cudy Re300 WiFi extender?
Cudy Re300 WiFi extender

Setup Cudy WiFi extender is an easy successful hike that extends the range and inclusion of your current Wi-Fi network. To organize, it will be necessary to eliminate and improve Wi-Fi in areas where clients have no or bad Wi-Fi. Cudy extender arrangements are the most effective way to turn your dead zone into enjoyable zones. Cudy’s Re300 extender can extend Wi-Fi up to 300 Mbps at 2.4GHz and at a reasonable charge.The cute extender may be hooked up to a Firestick, a beautiful TV, or a creative carport to extend your Wi-Fi coverage up to 10,000 square feet. Its two exterior reception apparatuses provide improved Wi-Fi coverage in all directions. It should be possible to set it up using ap.setup or 192.168.10.1 if you specify ap.setup in the URL.

Cudy extenders include the following features: 

  1. They extend Wi-Fi up to 300 Mbps at 2.4 GHz.
  2. It works with any regular router.
  3. It features two Ethernet cable connectors for a wired connection.

Setup Cudy Wifi Extender with WPS

  1. Before starting the setup procedure, make sure your extender is plugged into the nearest power outlet to your router.
  2. Let’s get the extender setup started.
  3. To begin, press the WPS button on both your router and your Cudy Re300 extender.
  4. Unplug it and reconnect it to the spot where you want Wi-Fi coverage and configure the extender once you’ve established it’s attached to an existing router.

Setup Cudy Re300 Extender with Ap.setup

  1. Unbox the Cudy extender Re300 and connect it to the nearest electrical outlet to your router.
  2. Confirm that your router is turned on, and then use an Ethernet connection to connect the Cudy extender and router.
  3. Now switch on any devices, such as computers or laptops, and open any installed web browser, such as Google Chrome, Firefox, or Edge.
  4. Then type http://Ap.setup in the address box and press enter to go to the login page.
  5. You’ll be taken to the setup page after that. The extender should be reset if AP.Setup does not display.
  6. If it appears, enter your username and password in the credentials box. Then click the login button.
  7. Finally, on the login page, select the Wi-Fi network that you want to extend.
  8. Once the extender has been configured, unplug it and place it where you want to expand the Wi-Fi network.However, validate that it is still in the router’s Wi-Fi range.
  9. Once you’ve confirmed it, plug it in and begin connecting your various gadgets to it.

Leave a Comment