The hiseeu camera 2MP 1080P Security Cameras, Bullet Surveillance Cameras, Waterproof, Outdoor, Indoor 3.6mm Lens IP Cut Day&Night Vision with Power Adapter is compatible with the hiseeu camera setup 8CH Camera System.
Hiseeu Camera
Please click the mouse right button to access the Main Menu > Record Conf.
- You can alter the schedule recording to suit your needs.
- Hit “Advanced” after that “Copy” to copy the settings to additional channels after selecting “Default Setting” for Channel 1.
Motion-Activated Recording
Please click with the right mouse button to access the Main Menu, Alarm, Intelligent Alert, and “Enable” checkboxes.
Worth Noting:
- The camera will only start recording if motion is detected.
- If you require an alert, push to a hiseeu camera app, check the box next to “Mobile Reported.”
Hit “Advanced” after that “Copy” to copy the settings to additional channels after selecting “Default Setting” for Channel 1.
To enable video
- Right-click the mouse and select “Playback,” or select “Playback” from the Main Menu.
- After choosing a channel, period, and date, click “OK.”
HISEEU SECURITY CAMERA FEATURES
- Easy installation – Wireless indicates that the connection between both the camera and the NVR is wireless, but both the camera (which does not have a battery) and the NVR still require a power cord to function.
- The wireless video security system is simple to set up and install (DC 12V plug power supply required), and these WIFI cameras are coupled with NVR at the production site.
- Using a VGA or HDMI cable, connect the PC/TV display to the NVR. Both a 2.4 GHz wireless network and an Ethernet connection are supported for connecting the router.
HOW TO USE THE HISEEU SECURITY CAMERA
- Using the CAT5e Ethernet Cable that was provided, connect the hiseeu wireless security camera system to the NVR box.
- Connect the NVR box to the TV monitor using the HDMI wire that was provided.
- Connect the NVR box to the network using the included Ethernet cable.
- Connect the NVR’s mouse and turn on the NVR using the original power adapter.
HISEEU CAMERA RESET
- Please use the right-click mouse button to travel to the Main Menu > Advanced > Restore.
- Select “Select all” and then Click “OK”
Hiseeu camera not working?
How to solve the problem of camera connect failed?
If your hiseeu camera is not working. First, could you please check to see if the white antenna on the camera has been dislodged?
- To determine whether the light is on, cover the sensor that is located under the lens of the camera.
- If it is light, then the camera is probably not that poor.
- If it is dark, you might try connecting the power supply from a working camera to the malfunctioning camera.
- If it is found that the camera is not damaged in any way.
- Right-click the mouse, then select “video manage,” then “Refresh / Search.”
- If your camera has a reset button, but no LAN port, please position it as close to your NVR as possible.
- Eliminate the channel with the connect failure status
- For ten seconds, press and hold the camera’s reset button.
- Perform a right-click on the mouse once more, then select “wireless add,” and then wait for the screen to display a new camera with the IP address 172.20.14.
- If there is no IP address, please reset the camera numerous times.
After adding the camera without any problems, you are free to leave the add camera interface.
FAQ
A 32GB Micro SD card has the capacity to record a video for 20 hours. In most cases, the 32-gigabyte card is sufficient.
Please use an SD card with a Class 10 rating, and the maximum SD card size that will work is 128 gigabytes.
Right clicking the mouse will take you to the Main Menu, where you can then navigate to System > Account > Modify Password.
To obtain the “CAPTCHA” QR code, please click the “Forget Password” > “Forget Answer” button. Launch the mobile application “XMeye,” and then select the “+” icon followed by the “Forget Your Device Password” option (FIND PWD). You will receive a super passcode once you have scanned the “CAPTCHA” QR code.
Yes. Internet connectivity is only required in situations in which users need to remotely access the system using a mobile application or a PC client. (You will need to connect the NVR to the router using the Ethernet cable that was provided in this scenario.)